介紹德國BURKERT直動式兩位兩通柱塞電磁閥
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；
[email protected]
地址：上海市嘉定區江橋嘉涌路99弄6號713室
Power ratings Ori? ce [mm] Power ratings Inrush AC Hold AC (hot coil) DC (hot/cold coil) [VA] [VA] [W] [W] 1.0 -12.0 105 37 16 16 / 21
Response times [ms]: Measured at valve outlet at 6 bar and +20 °C Opening: pressure build-up 0 to 90%, closing: pressure relief 100 to 10%
Response times Ori? ce [mm] Response times AC Response times DC Opening [ms] Closing [ms] Opening [ms] Closing [ms] 1.0 -12.0 10-30 20-30 20-80 20-30
采用焊接鐵心導管，提*密封**
防爆式
Direct-acting 2/2-way plunger valve
Valve 6027 is a direct-acting plunger valve.
直動式柱塞電磁閥。止動器與柱塞導管焊接在一起，以提*耐壓性和密封性。
? Increased leak-tightness with welded plunger guiding tube
? Explosion proof versions
Technical data Port connection G 1/4, G 3/8, G 1/2 (RC on request) Ori? ce DN 1.0 - 12.0 Body material Brass or stainless steel
1.4404 (316L) Coil material Epoxy Coil insulation class Epoxy class H Seal material
FKM, PTFE / FKM and PTFE / PEEK for high temperatures (EPDM on request) Medium Medium resistance according to material combination Vacuum,
Type 2508 Cable plug
Stainless steel body
2/2-way valve, NO
根據不同的應用，可以選擇各種密封材質。電磁線圈采用耐化學腐蝕的環氧樹脂封裝。
FKM/FKM -10 to +140°C FKM/FKM -10 to +100°C PEEK/FKM -10 to +80°C PEEK/FKM -10 to + 80°C PTFE/PEEK -40 to +140°C
PTFE/PEEK -40 to +100°C NBR/NBR -10 to +80°C Voltage tolerance ±10% Duty cycle / single valve 100% continuous rating Electrical connection
acc. to DIN EN 175301-803 Form A for cable plug Type 2508 (see accessories ordering chart)
Protection class IP65 with Cable Plug Installation As required, preferably with actuator upright
2/2-way valve, NC
The coils are moulded with chemically resistant epoxy.
and medium temperature Seat seal/external seal Circuit function Normally Closed (NC) Circuit function Normally Open (NO)
Circuit function B
Type 6027 Compact can be combined with…
與 DIN EN 17301-803 A 型電纜插頭配套，該閥的安全防護等級為 IP65，不銹鋼閥體式 NEMA 4X。
直動式電磁閥，通徑 DN 12
防震線圈
neutral gases and liquids (e.g. compressed air, town gas, natural gas, water, hydraulic oil, petrol)
and slightly aggressive medium Hot liquids and steam Seal material combination
The stopper and plunger guiding tube are welded together to enhance pressure resistance and leaktightness.
Various seal material combinations are available depending on the application.
? Direct-acting, powerful valve with diameter of up to DN 12
? Vibration-proof, bolted coil system
Kick and Drop’ electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation.
An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications.
In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.
Circuit function A
具有帶“kick and drop”電子線路式（2511插頭），用于過勵磁和降低功耗。
可選滑環軸承以提*使用壽命。采用專用密封技術，使該閥適用于*壓應用。
