技術數據VICKERS美國斜軸馬達
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；
[email protected]
地址：上海市嘉定區江橋嘉涌路99弄6號713室
0.025 (0.593) 0.040 (0.948) group) Weight(1) m kg (lbs) 29 (64)
41 (90) 54 (119) 76 (168) 106 (234) Drainage flow(2) qd l/min (U.S. gpm) 1.5 (0.39)
(69.5) 344 (90.5) 450 (118.5) 563 (148.5) Max.speed nmax rpm 3900 3500 3200 2800 2500
at Vg max eq max Max.speed nmax lim rpm 5100 4600 4200 3600 3200 at Vg max<eVg max(3)
Torque constant Tk Nm/bar 0.87 1.20 1.71 2.56 3.58 Vg max (lbf - ft/psi) (0.044) (0.061)
(0.087) (0.13) (0.18) Max. power motor pmax kW 125
154 201 263 328 at qmax e pnom (hp) (167) (206) (269) (352) (440)
and remains at that setting unless system pressure rises beyond the pre-set shift pressure setting.
These units are well suited to a vast array of both industrial-stationary
and on-off highway mobile applications and circuit types.
The proven design incorporating convex valve plates,
high quality components and manufacturing techniques,
results in high performance products capable of up
Max. torque cont. Tnom Nm 305 420 599 896 1254
at Vg max (pnom) (lbf - ft) (224.5) (310) (442) (661) (925)
Max. torque peak Tmax Nm 392 540 770 1152 1613 at Vg max (pmax) (lbf
- ft) (289) (398) (568) (849) (1189) Moment of inertia (rotating J kg m2
(lbf - ft2 )0.004 (0.095) 0.008 (0.189) 0.013 (0.308)
and track drives. Flushing valves can be added for integrated closed circuit cooling and flushing.
Typical application: ? Earth moving machines and construction equipment
? Agricultural and forestry vehicles
? Marine and Off--Shore equipment
The control then over-rides the electrical setting, by shifting the motor to maximum displacement.
Minimum system pressure of 40 bar [580 psi] bar pressure is required to operate the control.
Pressure rise during the motor shift from minimum to maximum displacement is approximately 15 bar (220 psi).
to 350 bar (5075 psi) continuous and 450 bar (6525 psi) peak performance.
This high performance, yet compact design allows high power density in small spaces.
Fully laboratory tested and field proven, these motors provide maximum efficiency and long life.
Heavy duty bearings permit high radial and axial loads.
A full range of options are available to tailor these units to your application needs.
To optimize vehicle operating charachteriscs,
2.0 (0.53) 2.8 (0.74) 3.6 (0.95) 4.9 (1.29)
The control operates similar to Code options E1 and E3,
when the solenoid is turned off the motor is biased to maximum displacement.
When the solenoid is turned on, the motor shifts to minimum displacement
? Industrial conveying, mixing, and other stationary in-plant uses.
Displacement Vg max cm3 /rev 54.8 75.3 107.5 160.8 225.1 (in3 /rev) (3.34)
(4.60) (6.56) (9.81) (13.73) Displacement Vg min cm3 /rev 15.8 21.7 31.0 46.4 64.9 (in3 /rev)
(0.96) (1.33) (1.89) (2.83) (3.96) Max.pressure cont. pnom bar (psi) 350 (5100) 350
(5100) 350 (5100) 350 (5100) 350 (5100) Max.pressure peak pmax bar (psi) 450 (6500) 450
(6500) 450 (6500) 450 (6500) 450 (6500) Max.flow qmax l/min (U.S. gpm) 214 (56.5) 263.5
an array of control options are available on variable displacement models; automatic,
operator selectable, hydraulic, electric, manual.
Flange or recessed gearbox mounting options allow use
with many types of drive systems including compact planetary wheel
VEaton’s family of bent axis motors offer vehicle designers greater flexibility than ever before.
Capable of operation in open or closed circuit applications.
